NORMALINK is a control and monitoring system for DALI general and emergency lighting.

It is possible to control from a mobile device (IOS/Android) both the general and the emergency lighting in one or several buildings.

All the control in the palm of your hand

The app has all the tools to set up your installation (addressing, additions to the system, scene configuration, timings....)
Global control or individual control by type of fitting (emergency lighting or conventional lighting).
Dimming option.

Global quickview of the buildings.

Control up to 64 fittings by gateway.

Possibility of integrating emergency lighting and conventional lighting in the same control system.

Scenes execution.

Emergency lighting failures per type (lamp, battery, duration or communication).

The system can be set up and managed in a very simple and intuitive way

Lines of up to 64 DALI fittings (conventional lighting and / or emergency lighting) connected to the IDNG64 gateway.
IDNG64 can be connected to the local TCP/IP network through the Ethernet port.
Addressing of the system from the NormaLink app (automatic or manual)
Creation and edition of groups and scenes.
Timings set up from the app itself.

Network parameters set up.

Three different user profiles (Admin, manteinance and standard).

Manual or automatic addressing.

Creation and edition of scenes.

Timings set up.

Test configuration.

Dimensions: 105 x 90 x 60 mm.
6 DIN RAIL modules.
Power Supply: 230 Vac · 50/60 Hz.
Battery type: CR2032.
Capacity: Up to 64 DALI fittings (emergency lighting and / or conventional lighting).
Maximum wire lenght: 300 meters.
Power supply for DALI bus included.
DALI wire: 2x 1,5 mm2.
Imax: 250 mA.
Test button to set all the connected fittings into “Identification mode”.
Ethernet port.
Web server for the set up.
“Reset” button to restore the initial parameters.
“Link” indicator to inform about the status of the communications of the DALI bus.
“Fail” LED to indicate a failure in the DALI line.