Central battery system

C24

C24

The C24 bank family provides remote power supply for emergency, signal and beacon lights at 24 Vdc.


CE

Manufactured according
to UNE-EN 50171 standard

C24
FAMILIES COMPATIBLE WITH 24 VDC
hermeticxl

Hermetic XL

via led

Via led

via led empotrable

Via led surface

europrisma

Europrisma

signal

Signal


Much more than power supply equipment

These are smart battery banks that alert as to possible anomalies, both within themselves and on any of the four lines where the emergency, signal or beacon lighting equipment is connected.

100%-guaranteed
operation

In addition to verifications in real time, the C24 banks perform operational and autonomy tests periodically according to selected settings.



CN-B Plus




Remote control

The C24 banks may be integrated into a smart lighting project, and then remotely controlled from a computer or C-NB PLUS bank.

esquema 3I

Permanent control

It is also possible to decide the status of each one of the bank's four outputs. In non-permanent mode (lights only one if there is a failure in electrical supply) or in permanent mode (lights on both when network is present and when absent).

Operational modes

modofuncionamientoI

Adjustable charging LED

The C24 system controls the light status LED that are connected to each one of the four outputs:

STATUS LED CONTROL


Encendido
On: OK
Apagado
Off
Parpadeando
Blinking: BREAKDOWN
 


Ideal for premises where the status LED may be bothersome (hotel rooms or hospitals).

Adjustable autonomy

According to the number of pieces of equipment connected and the batteries used, the bank may deliver 1, 3 or 8 hours of autonomy (adjustable at the bank itself).


1 hora
3 horas
8 horas
 

See the following table.



C24

C24-100



C24

C24-300

Fuego Covers a fire sector

 







Two banks, two power supplies

Within the C24 family, there are two battery banks, according to the power supplied.

 

  C24-100   C24-300    
Batteries 2 x 12 V · 7 Ah 2 x 12 V · 9 Ah 2 x 12 V · 12 Ah 2 x 12 V · 18 Ah 2 x 12 V · 24 Ah
Autonomy 1 h 3 h 8 h 1 h 3 h 8 h 1 h 3 h 8 h 1 h 3 h 8 h 1 h 3 h 8 h
Total output power (w) 88 W 36 W 14 W 115 W 48 W 19 W 154 W 36 W 27 W 234 W 105 W 42 W 314 W 136 W 58 W
Maximum current (a) 3.86 1.70 0.76 4.97 2.19 0.97 6.62 2.92 1.30 9.94 4.39 1.95 13.25 5.85 2.60
Phase monitor input Yes Yes
Output control 4 4
Floating power contacts    Yes Yes
Operational indicator Yes Yes
Power supply indicator per battery Yes Yes
Breakdown Yes Yes
Network power supply indicator Yes Yes
Battery power supply indicator    Yes Yes
Breakdown alarm indicator Yes Yes
Complete discharge indicator Yes Yes
Active output indicator    Yes Yes
BUS communication Yes Yes
Cable size Maximum intensity Distance*
1.5 mm2 1A 147 m
  2A 74 m
  3A 49 m
2.5 mm2 1A 245 m
  2A 123 m
  3A 82 m

* Distances for double conductor wires, and charging cable at the end of the line







CPS & Ecosafe

Manufactured according UNE-EN 50171

Central Battery systems, 230V ACDC, available as 400W, 960W or made to order systems (depending on the connected load in the project).



CPS

 

 CPSECOSAFE 4ECOSAFE 6
Batteries Pb 216VDC Pb 24VDC Pb 48VDC
Emergency supply 216VDC 216VDC 216VDC
Mains supply 230VAC 230VAC 230VAC
Total connected load 22000W 400W 960W
End circuits 64 4 6
Sub-stations YES _ _
Central processing unit YES YES YES
PNP modules YES YES YES
Automatic functional test YES YES YES
Automatic duration test YES YES YES
Mains monitor YES YES YES
Switch inputs YES YES YES
Potential free contact YES YES YES
General fault indicator YES YES YES
Fault indicator per end-circuit YES YES YES
Addressable system YES YES YES
Deep discharge protection YES YES YES
External communication bus YES YES YES
Monitoring software package YES YES YES
Battery charger YES YES YES
Emergency light blocked switch YES YES YES